Copyright 2019 by "FCS Solutiont"   •   All Rights reserved   •   E-Mail: antofcs722@gmail.com
Designed by GOEMO.de
The newly developed High Speed Computerized 4-side moulder from Shen Ko is excellent for long wood materials machining, such as construction materials, wall boards and finger jointer materials, etc. Equipped with jointer device and cross type chain feed conveyor table, the machine not only produces extra fine surface of product, but also dramatically increases machining efficiency.
SKG-230JH Series
P.T.DAINASINT
DAINAKA SEJATI INTERNASIONAL
SINCE 1982
Agent And Importer For Woodworking Machinery And Tools
FEATURE
 
Cross Type Chain Feed Conveyor : AT12

Feeding width min.~max. : 20~230 mm
Feeding height min.~max. : 10~150 mm
Working length : 1,000~5,000 mm
Material waiting area : 2 M (Available to adjust according to wood size)
Feeding power : 7.5 HP
Speed of spindle : 10~120 M/min
Diameter of feed roller : 200 mm
Chain feed motor : 3 HP
 
Lateral Conveyor Outfeed Device : AT23

Feeding width min.~max. : 20~230 mm
Feeding height min.~max. : 10~150 mm
Working length : 1,500 mm~Can be customized
Material waiting area : 2 M (Available to adjust according to wood size)
Feeding power : 3 HP
Speed of spindle : 30~140 M/min
Diameter of feed roller : 132 mm
Chain feed motor : 3 HP
PLC Control in Combination With HMI Touch Screen

The 10.4" high resolution touch screen.
Computerized automatic cutter calibration dramatically shortens time of tool calibration.
Spindle positioning accuracy: 0.01 mm.
200 sets of cutter data display.
50 sets of memory capacity of production modules.
Error message display facilitates trouble shooting.
Also suitable for small lots flexible production mode.
Spindle arrangement can be varied according to customer's requirement.
SPINDLE ARRANGEMENT FIGURES
Without jointer device, the timber have clear cutter mark.
Equip jointer device, the timber have no cutter mark under 80 M/min processing.
Jointer Device
Jointer device allows the cutter service time to be extended. It also ensures no cutting marks exist on the machining surfaces, while creating extra fine surface finishes.
Jointer Device
Jointer device allows the cutter service time to be extended. It also ensures no cutting marks exist on the machining surfaces, while creating extra fine surface finishes.
First upper feeding roller
The reinforced top feed roller for the first spindle is equipped with special device to eliminate wood jamming problem.
Deformation Analysis of the mechanical structure
The machine structure is subject to Finite Element Analysis, allowing the machine to achieve the optimal stability during running and high quality of machining.
Jointer device
Out broad bearing support on horizontal spindle
Table surface is hard chrome treat
Specifications and design features are subject to change without notice.